Posts Tagged ‘ tutorial ’

Top 67 Nokia N8 tips and tricks

Hi, and welcome to my MEGA tips-and-tricks post about the first Symbian^3 phone – the Nokia N8!

Continue reading

Setting up Remote Desktop Connection on HTC HD2

In case you have HTC HD2, or any other Windows Mobile 6.5 phone, you’ve probably always wanted to try the inbuilt Remote Desktop Connection app, called “Remote Desktop Mobile”. In case you have problems connecting, here’s very detailed tutorial. This tool will allow you to see and manage your PC’s screen on your phone!

Before you do anything on your WM cell, you need to enable remote connections on your PC. Right click on the Computer icon, and select ‘Properties’. Now select “Advanced system settings”

And then, go to “Remote” tab, and mark the second option in the Remote Desktop box:

OK, now the second phase: setting up your HD2. First, you need to make sure that your WiFi connection is enabled (in Settings->Wireless Controls). Now, go to Start, open the “Tools” folder, and run “Remote Desktop Mobile”.

You will see the following start screen:

As usually, I will go field by field:

1. Computer – type in the IP address of your PC.

2. User name – this is your user account name on your PC.

3. Password – the password that you use to log in to your PC.

4. Domain – if your computer is a member of a domain, fill in the domain name here.

I recommend you to mark “Save password”. You could click “Connect” right away, but for best results, select “Options”, and you will see the following screen:

It is extremely important to select “High color (16 bit)” in the “Colors” field. Otherwise, image quality will be very low. I like to select the “Full screen” option, and to leave the second option blank, but you can change these setting according to your needs.

One more thing, and we’re done. Click on  the “Resources” tab, and select “Play on this device” in the sound options. This will allow you to listen to your PC music on your phone!

Click “OK”, and then “Connect”, and in a moments time, you should be able to see your PC screen on your mobile phone. Here are some screenshots.

Unfortunately, this app doesn’t work in landscape mode, for unknown reasons… The other problem is that HTC HD2 has capacitive touchscreen, so you cannot use stylus, which makes it quite difficult to click on the icon you want, because they are sooo tiny. Update: this app supports multi-touch, so you can pinch to zoom in/out, and than the size of the icons stops being a problem.

Otherwise, very cool app, hope you enjoy using it.

Oh yeah, I almost forgot, I’ve also recored a video tutorial regarding this issue. You can watch it on my YouTube channel, or directly here:

Any questions?

How to set up SymNAS, or how to access your phone from PC via WiFi network

SymNAS is my favorite Telexy’s application, hands down, so I will really enjoy writing this tutorial. This is absolutely the best app for wireless access to your phone’s contents from your computer. I use SymNAS every single time I want to transfer files to/from my Nokia N82. You may think the wireless transfer it’s slow, but it’s NOT! I assure you, I stopped using USB cable connection when I installed this great utility!!!

Setting up SymNAS is relatively easy and it’s also semi-automatic. I’ve also recorded a 3 minute video tutorial, so head over to YouTube and have a look! While you’re there, you can also subscribe to my channel. :) (one click on the image will also get you there).

You can also watch it here:

So, lets begin. After launching SymNC (again, I’m using SymNC, which consists of SymNAS, among other apps), scroll down till you get to Settings. Open it, and select NAS:

You will see the following screen:

Now, we will make a new share (shared folder). As you can see, I’ve already shared my entire memory card (E:\), so I’ll explain sharing for phone’s memory (the procedure is basically the same):

Click on Options->Add new and you will get to the screen where you need to choose the desired folder and its name.

Click on ‘Folder’, and the Options->Browse. You should see this:

In this case, I will select entire phone’s memory (including all subfolders) by clicking ‘Done’ while C:\ is highlighted. (You can browse to the specific folder by clicking on C:\ and then pressing ‘Done’ after selecting the folder.) If you did this correctly, you will now have the option to rename your share:

I will leave the given name. Click ‘Done’ and you will see the following warning popup that tells you that everyone can access your share, and it offers you to change that:

If you want to select specific pre-made accounts (how to make a new account in SymNC is described in detail in one of my previous tutorials), select ‘Yes’. Otherwise select ‘No’. If you clicked on ‘Yes’, you will be at the screen that will allow you to select user and user-specific read/write permissions:

In the ‘Account’ field, select the desired account, and modify the read/write capabilities if you want to. Click ‘Done’ and you should see your new share.

Press ‘Back’ and select ‘Network Jacks’. Now click on Options->Add new and you will be at the following screen:

Now, field by field:

1. In the ‘Access point’ field select the access point that connects to your home/work computer network.

2. If your computers are connected in a workgroup, skip the ‘Member of’ field, otherwise select ‘Domain’.

3. Depending on your previous choice, third field will be either ‘Workgroup’ or ‘Domain’. In both cases, you will need to fill in the name of your workgroup or domain. To find this on your PC (I assume you use Windows 7), right click the Computer, and then select ‘Properties’. You will see the basic info about your PC, and you will have to click on ‘Advanced system settings’, located in the upper left corner of the page:

After doing so, click on the ‘Computer name’ tab, and you will see the name of your workgroup:

My workgroup name is “WORKGROUP” (how innovative, huh? :) ), so I will leave that intact because that name is automatically filled in.

4. ‘Autoconnect’ is the option that will allow you to select when will your phone be accessible from PC. You can choose between ‘Disabled’ (which is actually Manual plugging in), ‘Always’ which drains the battery life, ‘In charging mode’ which is self-explanatory and “On Application start’ which plugs in your mobile to your computer network every time you launch SymNAS/SymNC. I like to use ‘Disabled’, because it suits my needs the most.

Click ‘Done’ and setup is finished! You will see your freshly made network jack:

Click on it and select ‘Plug in’, wait a few seconds, and the following popup screen will emerge:

Remember, or even better, write down the two last lines, because you will need to type in that information on your PC when mapping network drive.

Again, I will explain this for Windows 7. Open Computer and click on ‘Map network drive’ (located up, in the middle), and then fill in your phones name OR its IP address (192.168.1.25 in my case) in the ‘Folder field’. Click ‘Finish’ and that should be it, you are now able to access your phones files and folders from your PC via WiFi network! Superb functionality, don’t you think?

I hope you like this tutorial, and that you find it useful. Questions and comments are, as usually, welcome.

Follow

Get every new post delivered to your Inbox.

Join 42 other followers